EDM-80
Toilet, bathroom and shower ventilation fan, suitable for wall or ceiling mounting. Capable of discharging to a duct system or directly to the outside. Can be supplied with electronic time delay allowing up to 15min <run on>. Duct adaptor kit also available. Air flow: 80m3/h.

EDM-160
Kitchen & bathroom ventilation fan suitable for wall or ceiling mounting. Capable of discharging to a duct system or directly to the outside. Can be supplied with electronic time delay allowing up to 15min <run on>. Duct adaptor kit also available. Air flow: 160m3/h.

 


 


TD-MIXVENT
TD in line, mixed flow extractors designed for installation either at the inlet to ducted ventilation or inserted at any point within the ducting system. The Mixvent technology allows for high capacity axial performance together with very good pressure development and quiet operation.
Air flow: 160, 250 & 360m3/h.
Two speed operation as standard. Timer versions available.

REB
These speed controllers are suitable for use with most of these fans and provide electronic infinitely varable speed control.



                                              

 


 


HXM
Shaded pole, single phase motor 220-240V 50Hz. IP40 enclosure conforming to UNE 20-111 and CEI 23-5 standards. Class B insulation. Sleeve bearings. Impellor and wall plate painted epoxy galvanised sheet metal. Speed controllable.
Fan may operate with the shaft in vertical or horizontal position.

HCM
Extract fans for glass or wall mounting, suitable for domestic or commercial applications: cord operated switch and shutter position reversible. Suitable for direct discharge. Three sizes, 400, 600 & 900m3/h.

 


 


CK-40F
Centrifugal extractor fan for application in extract canopies. Easy installation whether on the wall or within a cooker hood. Provided with a filter and a drip tray and suitable for ducted discharge. Air flow: 360m3/h.

CK-60F
Centrifugal extractor fan for application in extract canopies. Easy installation whether on the wall or within a cooker hood. Provided with a two speed motor, a filter and a drip tray, and suitable for ducted discharge. Air flow: 625m3/h.

 


 


CK-25N
Centrifugal extractor fan for application in extract canopies.
Easy installation whether on the wall or within a cooker hood. Provided with a drip tray and suitable for ducted discharge.
Air flow: 250m3/h.

CK-50
Centrifugal extract fan mounting under kitchen canopies extracting steam, grease, odours etc. Suitable for horizontal or vertical discharge. Washable grease filter assembly can be supplied. Easy installation. Air flow: 480m3/h.

 


 


CKB
Centrifugal exhausters

Standard construction:
_ Specially designed for installation within kitchen hoods
   or in ordinary ventilation systems.
_ Safety electrical wiring conforming to European
   standards.
_ Single phase 220-240V 50Hz.
_ For cleaning purposes the main components are easily
   dismantled without requiring special tools.
_ CKB-800 and 1200 with a butterfly shutter as standard.

Suitable for vertical or horizontal position.

Accessories:
_- Inlet spigot.
_ Plenum chamber provided with several inlet spigots
   for use in central ventilation installations.





top of page  - - -  Home

PLENUM CKB
The plenum is designed to suit the CKB-600 and CKB800 fans, allowing connection of multiple duct inlets from kitchen, bathrooms etc. The spigot is supplied to enable direct single duct connection to the fan



PORTABLE COOLER PBB-PBT
Industrial cooling fans designed to provide generous quantities of air for personnel cooling, drying installations, work areas, etc..